Adventurer Two Utility Vehicle


When you need a little something extra, the Adventurer two comes through. Its 800 lb. payload capacity, beefed up transaxle and four wheel drum brakes means it goes where you and your stuff want to go, all with comfort and security. Across campus or a secluded valley, this big brother of a hauler will take you there.

Yamaha Built 357F Gas Engine

We build the car, we build the engine. None of the competition can say that. Our reliable, low-emission 357cc engine produces 11.4 horsepower of muscle and is the most fuel efficient in the industry. And thanks to a splash-style positive lubrication system, the need for an oil pump and oil filters has been eliminated.

Filterless Oil System

Our Yamaha gasoline engines use a splash-style positive oil lubrication system that eliminates the need for an oil pump. And with no oil pump to protect, there's no need for an oil filter. You save on maintenance, you don't have to buy new filters, and you don't have to figure out how to dispose of the old ones.

HybriCore™ Chassis

How do you make a chassis nearly 20% lighter and 2.5 times stronger? We mated an automotive, ladder-style, 100% robotically welded frame, protected by an 18-step paint process, with a polypropylene structural floor. It's unique design provides added strength and protects the battery.

Automotive-Style Dash

Automotive-style, with key, headlight switch, low oil warning light, storage compartments and cup holders located right where they should be.

Low Cost of Ownership

You're about maintaining the course, not the vehicle. So this one boasts the lowest cost of ownership in the industry. The lowest. Period.

Maintenance-Free Rack-and-Pinion Steering

Steering this nimble and responsive was once found only on high-performance sports cars. Our version is permanently greased with sealed bearings and is virtually maintenance free.


The extra thick 5 mph-rated bumper is designed to protect the body and frame, releasing air upon impact. A textured surface minimizes scratches and scuffs, and if you need to replace it, two bolts does the job.

Heavy Duty Suspension

We use an automotive-style, coil-over-shock strut suspension that minimizes roll and delivers a smooth, comfortable ride. And yet it delivers extra heavy-duty performance, front and rear.

2" Receiver

Designed to be as versatile as you are, the standard 2" receiver accommodates a wide variety of pull-behind accessories.


The conveniently located horn is located close to the accelerator and brake pedals. A quick turn of the ankle lets them know you're coming.

Tires & Rims

Four-ply, 18 x 8.5 x 8 tires are designed to minimize turf compaction and are mounted on durable powder-coated rims color-matched to the seat.

One-Piece Fender Well with Integrated Splash Guard

Inner fenders and splash guards are made of one-piece seamless plastic and are designed to keep mechanical parts and cargo dry and clean.

Greaseless Chassis

Sealed bearings, automotive grade tie-rods and permanently lubricated steering components that never need greasing save you time and money. That's smart design.

Headlights & Tail Lights

What if the sun goes down before the work is done? No worries. The Adventurer One comes standard with sealed halogen headlights and tail lights to help you find your way back to the cart barn.

Durable, Flexible Body Panels

Did we mention this vehicle isn't afraid of work? Its body is made of custom-formulated thermoplastic olefin and the front is painted with a two-part, color-matched topcoat of high-luster, automotive grade polyurethane. It's as tough as it is beautiful. And since it's color matched, scratches are less noticeable.

Durable, Easy-To-Clean One-Piece Floor Mat

The point was to make it easy to clean. So we made it one piece, covering the floorboard and footrest area. We made it from rubber to provide cushioned comfort for the occupants.

Easy-Grip Steering Wheel

It's thick, contoured, and textured for easy gripping. It's integrated notepad and pencil holder provides the perfect place to put your daily to-do list.

OVERALL LENGTH 115.0 in. (2922 mm)
OVERALL WIDTH 48.9 in. (1243 mm)
OVERALL HEIGHT (without suntop) 47.2 in. (1200 mm)
WHEELBASE 75.5 in. (1917 mm)
FRONT WHEEL TREAD 39.0 in. (990 mm)
REAR WHEEL TREAD 38.6 in. (980 mm)
ENGINE TYPE Yamaha built, low emission single cylinder 60° incline OHV
BORE x STROKE 85 x 63 mm
HORSEPOWER 11.4 HP (8.5 Kw/3500 rpm)
LUBRICATION SYSTEM Splash style positive oil lubrication
OIL CAPACITY 1 U.S. quart (1 liter, 1000 cc)
AIR CLEANER Two stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge
IGNITION SYSTEM Transistor magneto ignition
TRANAXLE V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 13.65:1 drive axle ratio
FRAME HybriCore™ Chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor. Frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and a electrostatic applied polyester/urethane powder topcoat
BODY Custom-formulated thermoplastic olefin; front is painted with a two-part topcoat of high-luster automotive grade polyurethane
STEERING Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed bearings and greaseless tie-rod ends
FRONT SUSPENSION Tru-Trak II™ fully independent automotive-style strut suspension
REAR SUSPENSION Unit swing arm with coil springs over hydraulic shock absorbers
BRAKES Self-adjusting, mechanical brakes on all 4 wheels
SEATING Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp and moisture resistant polypropylene bottom, strengthened with plated steel inserts
BUMPER Front 5 mph energy-absorbing bumper
MAX FORWARD SPEED 15 mph (24 km/h)
MAX REVERSE SPEED 11.4 mph (18.4 km/h)
TURNING RADIUS 10.8 ft (3.3 m)
DRY WEIGHT (less battery) 847 lbs (384 kg)
CARGO BOX MATERIAL Roto-molded linear Polyethylene
CARGO BED CAPACITY 800 lbs (363 kg)
CARGO BED SIZE (LxWxH) 47.6 in. (1209 mm)x 48.9 in. (1243 mm)x 14.0 in. (356 mm)
CARGO BED LOAD HEIGHT 27.1 in. (690 mm)
FUEL TANK CAPACITY 5.8 US gal (22.0 L)
TIRE SIZE FRONT: 18.00 x 8.50-8.00 (4-ply rating) REAR: 18.00 x 8.50-8.00 (6-ply rating)
AVAILABLE PAINT COLORS STANDARD: Tortuga, OPTIONAL: Glacier, Garnet, Sandstone Metallic, Cobalt Metallic, Anthracite Metallic, Onyx Metallic
WARRANTY Standard 2-year limited vehicle warranty

*Specifications subject to change without notice